Видео

Thank you! Maybe someday.

Thank you!

Thank you!

Yup. I nailed it and then caulked around it.

Thanks and thanks for the comment.

Thanks.

Awesome! Thanks for the explanation!

I can't tell if you're joking or not.

@@HowIDoThingsDIY not a joke . I use a leaf blower low settings . Blows off all the dust then I just sweep it . Works good

Alright! I have not tried that.

I consulted with my electrician and he said you need an electrician. He suggested a separate wire from the panel for each AC unit. You're pulling way too much power in an old house. That's really the only correct and safe solution.

@@HowIDoThingsDIY Thank you for your help

I guess they didn't cover that in engineering school. Haha. Although I am educated, sometimes I make bad choices in the heat of the moment when I'm trying to get something done. I washed my hands immediately afterwards! Thanks for the comment and for pointing this out for the other viewers. Much appreciated!

Ha. Sorry. You don't need to use that oil or any oil for that matter. That was just an extra step I took. I'm sure there are cheaper options that would also be safe for the birds. You may be able to get the oil locally and save money.

You're welcome!

Ok. Thanks.

@@HowIDoThingsDIY anytime brother,stay safe

@@scottdavis5076 I will. I usually am. It might be that the camera angle that made it look worse that it was. Either way, thanks for pointing it out.

I'm pumped too!

Absolutely. Pretty much everyone has old caulking that needs replacing. Thanks for the. Comment!

Here you go! howidothingsdiy.com/plans/ols/products/dewalt-dwe7491-folding-outfeed-table-plans

Thank you!

I don't know. A few. I have chapters. But honestly, this was one of my easier builds. Thanks for the comment.

Well, I planed it just to clean it up. But I think it's somewhere between 3/4"-1". Thanks for the comment!

howidothingsdiy.com/plans/ols/products/simple-bird-house

I love to sit and enjoy watching the birds.

@@brendamcknight779 Oh ya! So relaxing. I like watching little turf war fights break out over bird seed. Haha

Ugh. I hate that too. That is usually why I do it myself. Thanks for the comment!

I didn't notice a noticable difference in sound. I didn't it purely for cosmetics. Thanks for the comment!

I don't completely understand you're question. I like to use plywood but either is acceptable.

@@HowIDoThingsDIY I meant when installing the horizontal fire blocking, it essentially has to line up perfectly with your top plate line otherwise it would extend past the top plate and interfere with the ceiling sheet rock inside the room. Figured the Sheetrock would be easier to shave away if that happened.

@@infiniti2015 Ah! Got it. Yes. Or fall a little short.

@@HowIDoThingsDIY Cool. Thank you!

@infiniti2015 You're welcome!

He designed the part in CAD, made the program and loaded the wood. Not exactly traditional woodworking but it's still pretty cool. Thanks for the comment!

@@HowIDoThingsDIY I get it. I think it's cool for a Walmart shelf sort of deal.

@@heffdogg420 Well, while these boards are super high quality and made of very high quality wood, they are also mass produced. Could you imagine how long it would take to drill all those holes by hand!!! Just crazy.

@HowIDoThingsDIY I do know how long it takes. Lol. I literally make cribbage boards without the computer. But I just realized as I type this that I don't make them by hand either. I use the tools I purchased just like your friend. I reckon I just don't like seeing the exact same thing over and over. Have a good day man.

@@heffdogg420 Ah! I can understand how you feel then seeing as how you've been though the process. You have a good day as well.

Absolutely. Thanks for adding that.

Haha. Ya. I try to have fun with it. Thanks.

I appreciate that. I was trying to make it as complete as possible without making it too long.

It just adds overall stiffness to the frame of the jig. Which improves the tolerance of the cuts.

Thanks!

That's fantastic!

Thanks!

@HowIDoThingsDIY of course bro 😎 🙌🏼

It sure wasn't hard to find examples of terrible wood, unfortunately.

Thanks! I think everyone is looking for a gimmick to stand out. My gimmick was simplicity.

Sorry, I should have mentioned that. I like to use window glazing putty. amzn.to/3yJgAya

I'm sure they do. Those guys are rascals. My birds have been emptying mine in like 2 days!!!

@@HowIDoThingsDIY Mine have too 🤪🐦

@@Jesuslovesyou709 It's totally worth it though. My son, ands cats freaking love the show.

@@HowIDoThingsDIY 😂

I'm thinking about doing a folding infeed table as well.

You can speak as freely as you like. You won't be hurting my feelings. Thanks for the comment and the feedback!

@@HowIDoThingsDIY , The best instructional videos place emphasis on quality of the video, and of the information. Music, or other distractions are just that. I love that we can go to find instruction on any subject we might have an interest in. Woodworking is a good platform. Make the channel yours, but no need for gimmicks. Talent is what sells here. Both in the content, and personality. Best wishes, my friend.

@davidgraham2673 I honestly do that stuff more for me. Sometimes I get burned out and just need to have some fun.

@@HowIDoThingsDIY , I hear you. If you're looking for something different, gave a portion of time where you can teach a specific skill. Take your time, explain carefully, and give pointers, and pitfalls to avoid. I've trained many guys in my trade, and until they master basic skill sets, they'll never improve. You might find that's your niche: teaching. Anyways, best of luck. I subscribed.

Hahahaha. Thanks.

Hahahaha! I've actually heard that before.

Oh wow! Well, I never intended this to be for anyone to make money. More of a fun project to do as a family. Thanks for the comment!

@@HowIDoThingsDIY Not your fault lol..I use to build them about 15 years ago and you could make money with them..after watching your vid I looked and was shocked how the prices dropped.someone is selling the same model you make in this video...

Hahaha. For sure...

You need a "No Squirrels Allowed" sign. That should do the trick 😂

@@wafflestomper9829 HAHAHAHHAHA. I should make a tiny sign that says that.

Thanks 👍